EliteNAS EN850W+BXE – 8U 48 Bay Windows Storage Server 2008 NAS + iSCSI Rackmount w/ Expansion
Note: Please allow 3 days for rackmount testing before shipment.
EliteNAS Windows NAS / iSCSI Unified Storage hardware come standard with dual 10/100/1000 network and hardware RAID support. Quad 10/100/1000 network supports network teaming or redundant networking providing superior performance for your critical data. Build-in hardware RAID not only provides a peace of mind by providing redundancy for hard drive failure but also allows offloading of complex RAID parity calculation to dedicated RAID engines lowering CPU utilization from host computer/server.
SAS Expander support for storage expansion
Allows SAS expander to connect to 7 additional SAS expander JBOD (EliteSTOR ES208X+BE, ES316X+B or ES424X+B) units, or up to 122 total drives, for 244TB of total storage capacity.
Supports SAS or SATA hard drives
Supports both high performance SAS hard drives or high capacity, low cost SATA hard drives.
Hardware RAID support up to 60
New support latest RAID level, including RAID 0, 1, 3, 5, 6, 10, 30, 50 and 60 for advance data protection in large number of hard drives deployments.
Feature Rich Network Storage – Built-in De-duplication, Snapshot, Folder Replication and iSCSI
EliteNAS EN850W+BXE with Microsoft Windows Storage Server 2008 (WSS2008) provides file and block level storage services that are built-in on Windows Server 2008. File based access fully supports Active Directory in CIFS and NFS. Block level storage is supported by providing both iSCSI initiator and target. WSS2008 is optimized for performance in the file serving role. WSS2008 also comes standard with Single Instant Storage (SIS) for de-duplication, Volume Shadow Copy service (VSS) for snapshot and Distributed File System Replication (DFS-R) for file replication.
iSCSI for Hyper-V Host and Guest
With Hyper-V, the Microsoft hypervisor-based server virtualization technology, enables you to make the best use of your server hardware investments by running multiple different operating systems—Windows, Linux, and others simultaneously on a single server utilizing the power of latest computer processor technology. WSS2008’s built-in iSCSI support enables Hyper-V guest to expand their storage via iSCSI. It also supports shared iSCSI storage with SCSI-3 persistent target.
Additional Storage Expansion-No Storage Expansion Gateway License Needed
In order to maximize the return on investment, the EN850W+BXE allows additional direct attached or storage area network storage connected via EN850W+BXE as NAS or iSCSI.
10Gb Network Interface Controller Option for 10GbE Network Support
10Gb Ethernet network Interface controller card is supported for 10Gb Networking. With 10 times faster bandwidth compare to 10/100/1000 Gigabit Ethernet, 10Gb network interface controller provide high performance solution when needed. XFP, SFP+ and CX4 connector are available.
- Operating system specific design for NAS and iSCSI application
- Dual Intel Nehalem Xeon Quad-Core processor.
- 6GB ECC DDR-3 memory in Triple Channel.
- Supports the latest 2TB SAS or SATA II hard drive. Up to 96TB of storage capacity.
- Hardware RAID 0, 1, 1+0, 3, 5, 6, 30, 50, 60 with global or dedicated hot-spare.
- Quad Gigabit Ethernet.
- Convenient setup and easy maintenance. Support Remote Desktop Connections, Remote Web Administration, and Windows Server Remote Administration Applet
- Supports CIFS and NFS
- Support Windows Active Directory Service.
- Support de-duplication by using Single Instant Storage (SIS)
- Support replication by using Distributed File System Replication (DFS-R)
- Support Snapshot by using Volume Shadow Copy service (VSS)
- Supports iSCSI.
- Supports iSCSI target and initiator.
- Supports Microsoft Hyper-V Server.
- Optional 10GbE Ethernet controller card for 10GbE Network.
|Form Factor||8U Rackmount|
|Processor|| Dual Intel Nehalem Xeon Quad Core 4.8GT/s
|Memory|| 6GB DDR-3 ECC Memory;
Operate-in Triple Channel mode
|RAID Level|| Hardware RAID 0, 1, 1+0, 3, 5, 6, 30, 50, 60
with global or dedicated hot-spare
|RAID Configuration||2 x 1200 MHz Hardware RAID controller|
|Expansion Slot|| Mini-SAS (SFF-8088) * 2
Up to 7 units or 122 total drives per expansion port
|Chipset||Intel X58 Chipset|
|Network|| On-board 4 x 1000/100/10
(Intel® 82574L Gigabit Ethernet Controllers)
Supports Teaming over 2 ports, 802.11ad, ALB
|Hard Drives||SAS or SATA II x 48|
|Power Supply||1350W Hot-swap redundant power supply|
|Status Indicators|| Power and Overheat / FAN Fail LEDs
HDD Power and Activity LED
|Dimension (in)||14″H x 19″W x 28″D|
|Certifications & Compliance||FCC, CE, UL, RoHS|
|Limited Warranty||2 Years|
|OS||Microsoft Windows Storage Server 2008|
|CPU||Dual Intel Nehalem Xeon Quad Core 4.8GT/s QuickPath Interconnect|
|Memory|| 6GB DDR-3 ECC Memory; Operate-in
Triple Channel mode (OS limited to 4GB)
|RAID Structure|| Hardware RAID 0, 1, 1+0, 3, 5, 6, 30, 50, 60
with global or dedicated hot-spare
|Expansions Slot|| Mini-SAS (SFF-8088) * 2
Up to 7 units or 122 total drives per controller
(Supported by EliteSTOR ES208X+BE, ES316X+B, and ES424X+B
|Hard Drives Trays||48 * Hot-Swappable|
|Hard Drives|| No HDD
| 500GB RAID
HDD * 48
| 1TB RAID
HDD * 48
| 2TB RAID
HDD * 48
Note: Please allow 3 days for hard drive installation and testing.
Note: All hard drive bundles are pre-installed and tested before shipment. Hard drives are then packaged individually to avoid damage during shipping.
|AC-MYR-10GE8ARE||Single XFS port 10G network interface card upgrade|
|AC-MYR-10GE8BSE||Single SFP+ port 10G network interface card upgrade|
|AC-MYR-10GE8BCE||Single CX4 port 10G network interface card upgrade|