EliteRAID ER104UT+ – 1U 4 Bay USB 3.0 / eSATA Hardware RAID 5 Rackmount (Silver)

EliteRAID ER104UT+ – 1U 4 Bay USB 3.0 / eSATA Hardware RAID 5 Rackmount (Silver)

EliteRAID ER104UT+ – 1U 4 Bay USB 3.0 / eSATA Hardware RAID 5 Rackmount (Silver)
Item# ST-SAN-ER104UTplus
$549.00
Overview
The EliteRAID ER104UT+ is a 4-bay hardware RAID 5 rackmount storage unit that utilizes high performance USB 3.0 and eSATA interfaces to provide over 200MB/s in performance. The included USB 3.0 is backwards compatible with the widely available USB 2.0 port, which is a convenient feature when both USB 3.0 and eSATA connections are unavailable. With built-in RAID 0, 1, 10, 3, 5+hot-spare and JBOD, the ER104UT+ provides hardware RAID redundancy protection against hard drive failures. A brand new RAID mode, CLONE or N-Way Mirror, is also introduced to replicate the saved data throughout each of the installed hard drives. The RAID engine is embedded within the enclosure and performs all RAID parity calculations to reduce CPU utilization from the host computer, RAID controller cards are no longer necessary.

Note: Please allow 3 days for rackmount testing before shipment.

Features
  • World first 1U 4 bay USB 3.0 and eSATA Hardware RAID 5 storage.
  • Hardware RAID, supporting RAID 0, 1, 10, 3, 5, JBOD, Clone and hot spare disk.
  • Over 200MB/s read and 170MB/s write performance.
  • eSATA and USB 3.0 interface.
  • Backward compatible with USB 2.0.
  • True hardware RAID design within the enclosure, no driver and additional RAID controller needed.
  • New Clone mode (N-way Mirror) – all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data form one hard drive to several hard drives at the same time.
  • Supports SATA I (1.5Gb/s) and SATA II (3Gb/s) hard drives.
  • Over 2TB per volume via eSATA and USB on OS that support 2TB and above.
  • Automatic insertion / removal detection and rebuild.
  • Hardware RAID with standard Interface. No extra drivers required.
  • Build-in rackmount bracket.
  • Redundant power supply option available.

Spetifications

 Model  ER104UT+
 Form Factor  1U Rackmount
 HDD Trays  4 Hot-Swappable 3.5″
 RAID Level  0, 1, 10, 3, 5, Clone (N-way Mirror) with Hot Spare and JBOD
 Maximum Capacity  8TB
 Auto Rebuilding  Yes
 Hot-Spare  Yes
 Host Interface & Transfer Rate  USB 3.0 (backward compatible with USB 2.0) and eSATA
 Drive Interface  SATA I & SATA II
 Cooling Fan  4 x Internal
 Power Supply  220W 80PLUS; Auto switch for 100V~ 240V; 50 ~ 60Hz
Redundant power supply option available
 Control Interface  RAID Switch
 Status Indicators  Power LED, Overheat/FAN Fail LED
HDD Power and Activity LED
 Dimension (in)  1.68”H x 19”W x 21”D
 Weight (lb)  18
 Safety Regulations  CE, FCC, UL, RoHS

Available Models

 Model  ER104UT+  ER104UT+2E  ER104UT+4E  ER104UT+8E
 Hard Drive  No HDD
Bundle
 500GB RAID
SATA II * 4
 1TB RAID
SATA II * 4
 2TB RAID
SATA II * 4
 Total Storage Size  N/A  2000GB = 2TB  4TB  8TB

Note: All hard drive bundles are pre-installed and tested before shipment. Hard drives are then packaged individually to avoid damage during shipping.