EliteRAID ER316UT+B – 3U 16 Bay SATA to USB eSATA Hardware RAID 6 Rackmount
The EliteRAID ER316UT+B is a 3U 16-bay rackmount with USB 2.0 / eSATA interfaces (up to 200MB/s), and embedded hardware RAID 6 engine. The hardware RAID feature offloads complex RAID calculations from the client’s operating system to the RAID engine, which increases the overall read/write performance and eliminates OS compatibility issues. The built-in Web GUI management interface and event notification with SMTP E-mail and SNMP trap allow administrators to monitor unit status remotely via web browser without the need for additional software. In addition to RAID 5, Mirroring (RAID 1) and Striping (RAID 0), the ER316UT+B also supports RAID 6 to protect stored data against up to two hard drive failures. JBOD is supported via port multiplier and allows drives to be accessed individually. Utilizing both SATA I and SATA II drive interfaces, the ER316UT+B is guaranteed to achieve the high performance with fail-safe file protection.
Note: Please allow 3 days for rackmount testing before shipment.
- Dedicated RAID engines I/O processor.
- Hardware RAID to eliminate OS compatibility and increase overall performance.
- Supports RAID 0, 1, 1+0, 3, 5, 6, JBOD with hot spare disk.
- USB 2.0 and eSATA interfaces; providing up to 200MB/s in performance.
- Supports the latest 2TB hard drives; up to 32TB in a single volume.
- Over 2TB volume supported.
- Supports online RAID migration and online storage RAID capacity expansion to eliminate access downtime.
- Up to 8 different RAID volumes.
- Built-in HTTP web GUI management. No additional software required.
- Event notification via E-mail and SNMP trap.
- Serial port and LCD management is provided when HTTP web GUI is unavailable.
- Built-in redundant power supply for protection against power supply failure.
|Form Factor||3U Rackmount|
|HDD Trays||16 Hot-Swappable 3.5″|
|RAID Level||0, 1, 1+0, 3, 5, 6, JBOD|
|Maximum RAID Volumes||2|
|Host Interface & Transfer Rate||USB 2.0 & eSATA|
|Drive Interface||SATA I & SATA II|
|Cooling Fan||4″ Cooling fan * 2, 1.5″ Cooling fan * 3 from Power Supply|
|Power Supply||Redundant 650W Power Supply * 3|
|Controller Interface||Web-based management, Serial Port or LCD|
|Status Indicators||Hard Drive & Failure LEDs|
|Dimension (in)||5.25” H x 19” W x 23” D|
|Safety Regulations||CE, FCC, UL, RoHS|
|Limited Warranty||2 Years|
|Hard Drive|| No HDD
| 500GB RAID
SATA II * 16
| 1TB RAID
SATA II * 16
| 2TB RAID
SATA II * 16
|Total Storage Size||N/A||2000GB = 8TB||16TB||32TB|
Note: Please allow 3 days for hard drive installation and testing.
Note: All hard drive bundles are pre-installed and tested before shipment. Hard drives are then packaged individually to avoid damage during shipping.